Mounting 90 Mm Devices With Device Connectors On The Wall - Siemens SIRIUS 3SK1 Manual

8.14

Mounting 90 mm devices with device connectors on the wall

Requirements
Please note the following requirements for mounting on a level surface:
● Please observe the information about the mounting position in the chapter "General
technical data (Page 203)".
● Two properly executed drill holes with thread or plug on the level surface (per device
connector).
● Two M4 x 12 screws in accordance with DIN 784 (per device connector) to fit the holes.
● Use the device termination connector set for 3SK1 safety relays, > 45 mm wide.
Refer to the accessories list for the relevant article number in the chapter "Accessories
(Page 223)".
SIRIUS 3SK1 safety relays
Manual, 06/2018, A5E02526190021A/RS-AD/004
8.14 Mounting 90 mm devices with device connectors on the wall
Mounting
163