Mounting 90 Mm Devices With Device Connectors On A Standard Mounting Rail - Siemens SIRIUS 3SK1 Manual

8.10 Mounting 90 mm devices with device connectors on a standard
mounting rail
Requirements
● A horizontal 35-mm wide mounting rail in accordance with DIN EN 60715 has been
properly secured at the installation location.
● Please observe the information about the mounting position in the chapter "General
technical data (Page 203)".
● Use the device termination connector set for 3SK1 safety relays, > 45 mm wide.
Refer to the accessories list for the relevant article number in the chapter "Accessories
(Page 223)".
● Please observe the obligatory mounting rules in Section: "System configuration rules
(Page 109)".
SIRIUS 3SK1 safety relays
Manual, 06/2018, A5E02526190021A/RS-AD/004

8.10 Mounting 90 mm devices with device connectors on a standard mounting rail

Mounting
151