Mounting
8.14 Mounting 90 mm devices with device connectors on the wall
Procedure
Step
1
Push the device connectors together
until they engage.
2
Mount the cover on the left of the first
device connector.
3
Note the clearances required for the
90 mm devices.
Mount the device connector supplied
in the set for enclosures of 45 mm
upwards (right-hand side).
Tightening torques:
Top: < 0.1 Nm
•
Bottom: 1 Nm
•
164
Instructions
Figure
SIRIUS 3SK1 safety relays
Manual, 06/2018, A5E02526190021A/RS-AD/004