9.2.3
Connecting terminals
Hazardous Voltage
Can Cause Death, Serious Injury, or Property Damage.
Before starting work, therefore, disconnect the system and devices from the power supply.
Procedure for screw-type terminal blocks
Step
Instructions
1
Insert the relevant cable into square on the
screw-type terminal until it engages.
2
Hold the cable in the screw-type terminal.
3
Tighten the screw of the terminal in which the
cable is inserted.
4
Pull on the cable to ensure it is screwed tight.
SIRIUS 3SK1 safety relays
Manual, 06/2018, A5E02526190021A/RS-AD/004
WARNING
Connection
9.2 Devices 90 mm
Figure
181