Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for FONESTAR MX-4000
Summary of Contents for FONESTAR MX-4000
- Page 1 X-4000 MULTIZONE MIXER/PREAMPLIFIER INSTRUCTION MANUAL...
- Page 2 We take this opportunity to thank you for buying this product. We recommend you read the instruction manual before switching on the machine and follow the instructions that are given. Keep the manual for future reference. SECURITY AND THE ENVIRONMENT ELECTRICAL SECURITY Check that the current in the mains connection where the machine is to be installed corresponds to the power supply of the machine.
-
Page 3: Exemption Of Liability
The characteristics of the equipment and the content of the manual can change without forewarning. FONESTAR, S.A. does not assume responsibilities regarding the inappropriate use of the equipment or the information supplied in this instruction manual, and specifically disclaims any implied liability for marketability or fitness for any other use. -
Page 4: Controls And Functions Front Panel
DESCRIPTION The model MX-4000 is a professional mixer/preamplifier with 5 input channels to 4 output zones with independent volume control. It is suitable for P.A. and sound system installations with different speaker zones which need independent volume control. It counts on 4 balanced mic. Inputs or selectable lines, 1 auxiliary line input and 1 tel. paging telephone switchboard input assignable to each output channel. -
Page 5: Back Panel
MIC position, as the voltage in pins 2 and 3 of the XLR connector can damage the microphones. If in doubt consult your distributor or the FONESTAR technical service. - 5 -... - Page 6 CONNECTION Make the connections with the amplifier and all the system components switched off and disconnected from the power supply. Firstly, connect the audio sources to the inputs. For example, connect a dynamic microphone to the CH1 input and select the MIC position on the input sensitivity selector. If you use a pre-amplified table microphone, select the LINE position.
-
Page 7: Instructions For Use
INSTRUCTIONS FOR USE ON AND OFF Before switching the system on, check that the output volume controls are at their minimum. Switch on the rest of the audio system, lastly the mixer/preamplifier and adjust the output volume. To switch the system off, adjust the output volume and switch the mixer/amplifier off, leaving the rest of the system until last. - Page 8 Jumper to choose prio- rity, depending on signal level and on contact closure In this way, with the jumper in the ON position, when a signal is detected in the tel. paging input or CH 1 the rest of the inputs (CH2 to CH5) will weaken. Besides, closing the PRIORITY contact on the back panel with the push button or the switch, the CH2 to CH5 inputs will be weakened automatically.
-
Page 9: Technical Specifications
TECHNICAL SPECIFICATIONS MX-4000 CHARACTERISTICS Multizone mixer/preamplifier. Matrix audio system with 5 input channels to 4 output zones. 4 output zones with independent volume control. Phantom power supply. Priority paging. INPUTS 4 mics./balanced lines, combo (XLR and 6.3 mm jack) 600 Ω 2 mV and 47,000 Ω... -
Page 10: Warranty
2 months after being conscious of the problem. It is only necessary to contact FONESTAR if it is impossible or imposes an undue burden for them to solve it. To benefit from this warranty it is necessary to show the proof of purchase with the date clearly visible, with no corrections or crossing out. - Page 11 - 11 -...
- Page 12 www.fonestar.com...