Full Gauge Controls MT-530 Super Manual

1. DESCRIPTION
MT-530 %uper is an instrument that indicates and controls the environment temperature and
humidity, indicated for low and average relative air humidity (from 20 to 85%, without condensation) and
temperature of -10 to 70ºC. Its sensors of temperature and humidity are joined in an only bulb, that
reduces the space in wiring of the installation.
The instrument has serial communication for connection with the
Product complies with UL Inc. (United States and Canada).
2. APPLICATION
• Humidificators/dehumidificators
• Grains drying
• Laboratories
• Surgical rooms
• Climatized cellars
• Information technology centers
3. TECHNICAL SPECIFICATIONS
- Power Supply: MT-530 Super - 115 or 230 Vac ±10%(50/60 Hz)
MT-530L Super - 12 or 24 Vac/dc
- Control Temperature: -10 to 70.0 ºC ±1.5°C (with resolution of 0.1°C)
14 to 158 ºF ±3°F (with resolution of 1°F)
- Control Humidity: 20 to 85%RH ±5%RH (with resolution of 0.1%RH)
- Load current: 5(3)A/250Vac 1/8HP (each output)
- Dimensions: 71 x 28 x 71 mm
- Operation temperature: 0 to 50°C
32 to 122°F
- Operation humidity: 10 to 90% RH (without condensation)
4.4 - Parameters description
Fun
Access code: 123 (one hundred and twenty-three)
T
hermostat operation mode (THERM output)
Minimum setpoint allowed to the user (thermostat)
Maximum setpoint allowed to the user (thermostat)
Control differential (hysteresis) of the thermostat
Minimum delay to turn the thermostat output on
Humidistat operation mode (HUMID output)
Minimum setpoint allowed to the user (humidistat)
Maximum setpoint allowed to the user (humidistat)
Control differential (hysteresis) of the humidistat
Minimum delay to turn the humidistat output on
Humidity output (time on)
Humidity output (time off)
Auxiliary output operation mode (AUX)
Minimum setpoint allowed to the user (AUX output)
Maximum setpoint allowed to the user AUX output
Control differential (hysteresis) of the AUX output
Minimum delay to turn the AUX output on
Time base of AUX output timer
AUX output (time on)
AUX output (time off)
Low room temperature alarm
High room temperature alarm
Low room humidity alarm
High room humidity alarm
Minimum delay to turn the AUX output on (alarm mode)
Buzzer operation mode
Acting point of Buzzer by low temperature
Acting point of Buzzer by high temperature
Acting point of Buzzer by low humidity
Acting point of Buzzer by high humidity
Maximum time of the activated THERM output to activate the alarm
Maximum time of the activated HUMID output to activate the alarm
Maximum time of the activated AUX output to activate the alarm
Buzzer time on
Buzzer time off
Inhibition time of Buzzer during electrical supply
Display mode
Temperature display offset
Humidity display offset
Network equipment address RS-485
MT-530 %uper
TEMPERATURE AND HUMIDITY
DIGITAL CONTROLLER WITH
SERIAL COMMUNICATION
Ver.02
®
SITRAD via Internet.
Description
( )
4. CONFIGURATIONS
4.1 - Temperature and humidity adjust (SETPOINTS):
- Press SET for 2 seconds until
temperature for THERM output will appear.
- Use the keys and to change the value and then press
- Now and adjusted humidity for HUMID output will appear.
- Use the keys and to change the value and then press
-Then, if the AUX output is set to control (F14 = 0, 1, 2 or 3)it may appear
- Use the keys and to change the value for theAUX output and then press
4.2 - Parameters configuration
- Access the function F01 pressing simultaneously the keys
, releasing after that. Soon it will appear
- Use the keys and to enter acess code (123) and, when ready press
- Use the keys and to access the desired function.
-After selecting the function, press
- Use the keys and to change the value, and when ready, press
value and return to the menu of functions.
- To leave the menu of functions and return to normal operation, press
CELSIUS
Min. Max. Unit Standard
-99 999 - -
0 - refrig. 1 - heat - 0 - refrig. 0 - refrig.
-10.0 70.0 °C -10.0
-10.0 70.0 °C 70.0
0 1.5
20.0 °C
0 seg. 0
999
0 - dehum. 1 - hum. - 1 - hum.
0 - dehum.
0 100 %RH 0
0 100 %RH 100
0 20.0 %RH 5
0 999 sec. 0
0 999 sec. 5
0 999 sec. 5
0 10 - 5
0 100 - 0
0 100 - 100
0 20.0 - 5
0 999 sec. 0
0 999 - 0
0 999 sec. 5
0 999 sec. 5
-10.0 70.0 °C -10.0
-10.0 70.0 °C 70.0
0 100 %RH 0
0 100 %RH 100
0 999 min. 0
0 1 - 1
-10.0 70.0 °C -10.0
-10.0 70.0 °C 70.0
0 100 %RH 0
0 100 %RH 100
0 999
min. 0
0 999 min. 0
min.
0 999 0
sec.
0 999 1
sec.
0 999 1
min.
0 999 0
-
0 2 0
°C
-5.0 5.0 0
%RH
-20.0 20.0 0
-
0 247 1
appears, then release it. The indication
to record it.
SET
SET again.
and for 2 seconds until appearing
, and then press (short touch).
SET SET
(short touch) to visualize the value configured for that function.
SET SET
SET SET to memorize the configured
SET SET until appear
FAHRENHEIT
Min. Max. Unit Standard
-99 999 - -
1 - heat - 0 - refrig.
14 158 °F 14
14 158 °F 158
0 36 °F 3
0 999 seg. 0
1 - umid. - 1 - hum.
0 100 %RH 0
0 100 %RH 100
0 20.0 %RH 5
0 999 sec. 0
0 999 sec. 5
0 999 sec. 5
0 10 - 5
0 100 - 0
0 100 - 100
0 20.0 - 5
0 999 sec. 0
0 999 -
0
0 999 sec.
5
0 999 sec.
5
14 158 °F
14
14 158 °F 158
0 100 %RH 0
0 100 %RH 100
0 999 min.
0
0 1 -
1
14 158 °F
14
14 158 °F
158
0 100 %RH
0
0 100 %RH
100
0 999
min.
0
0 999 min.
0
0 999 0
min.
0 999 1
sec.
0 999 1
sec.
0 999 0
min.
0 2
0
-
-9 9
0
°F
-20.0 20.0
0
%RH
0 247
1
-
E251415
and the adjusted
or .
SET to record it.
to confirm.
SET SET
.