Indicators; About The Lighting Of The [Drum] And [Chord] Button Indicators - Roland FP-3 Owner's Manual

Playing Only the Bass Sound of the Chord Part
A Rhythm's Chord Part not only contains its fundamental bass sound, but
may also include the sound of instruments other than the bass. However,
you can have just the bass sound of such Chord Parts play.
You can also change the settings while the Rhythm is being played.
This setting is effective for all Rhythms until the FP-3's power is turned off.
1.
Hold down the [Song] button and press the [Chord] button.
The indicators for the [Song] and [Chord] buttons flash in red.
fig.02-07
2.
Press the [-] or [+] button to select the setting.
Indication
On
OFF
3.
Press the [Song] button.
The indicators return to their previous state.
About the lighting of the [Drums] and [Chord] button indicators
The indicators of the [Drums] and [Chord] buttons indicate the status of the
Rhythm performance, as shown below.
Indicator
Dark
Lit in red
Lit in green
All of the Chord Part's sounds are played.
Only the Chord Part's bass sound is played.
Performance
Performance is stopped
Intro/Fill-In/Ending is being played
Rhythm is being performed
Chapter 2 Playing Along with Rhythms
Description
27