Error Messages/Other Messages - Roland FP-3 Owner's Manual

Error Messages/Other Messages

Display
USr
Usr.
d.
P.
r.
dEL
E.32
E.40
E.41
E.51
* Error messages are indicated by an "E." before the number
When the Error message appears, the [-] and [+] button indicators flashes in red.
Press the [-] or [+] button, and you can cancel the error message.
User. Stores recorded Performances. (p. 12, p. 33)
The "." in the display indicates that there is Performance material already
recorded. (p. 12, p. 33)
Demo song number. (p. 12, p. 36)
Piano song number. (p. 12, p. 36)
Rhythm number. (p. 28)
This appears when you attempt to delete a recorded song (p. 37).
Additionally, this appears after recording a song when you try to select
another song (p. 13).
The amount of performance information is too large, and further recording is
not possible.
Too much MIDI data was sent from the external MIDI instrument at one
time, and the unit could not process the data. Reduce the amount of MIDI
data being sent to the FP-3.
A problem such as a loose MIDI cable or computer cable occurred. Make sure
the MIDI cables and computer cables are correctly hooked up.
A system error has occurred. Try performing the procedure over again.
Should this message continue to appear even after repeated attempts, please
consult the nearest Roland Service Center.
Meaning
47