Erasing Recorded Performances; Correspondence Between Recorded Performance And Track; Buttons - Roland FP-3 Owner's Manual

Erasing Recorded Performances

You can erase recorded performances.
fig.03-04
1.
Hold down the [Song] button and press the [Rec] button.
A confirmation message appears in the display.
fig.03-05
2.
Press the [Rec] button.
The recorded performance is erased.
If you do not want to erase the performance, press the [Play] or [Song]
button.
Correspondence Between Recorded Performance and
Track Buttons
A recorded performance will be assigned to the Track buttons as follows.
Track button
[R]
[1]
[2]
* You can also record to the [1] button regular keyboard performances in which
only the [1] button is specified.
Flashes in green Flashes in red
Performance recorded
• Rhythm (Drums Part, Chord Part) (p. 25)
• A performance of drum set tones
• Lower Tone in Dual play or Split play (p. 15, p. 16)
• The performance of the entire keyboard (except drum
set tones)
• Upper Tone in Dual play or Split play (p. 15, p. 16)
Chapter 3 Recording a Performance
Flashes in green
1
2
37