Motherboard Installation; Tools Needed; Location Of Mounting Holes - Supermicro X10DRT-B+ User Manual

Table of Contents

Advertisement

X10DRT-B+ Motherboard User's Manual
2-5

Motherboard Installation

All motherboards have standard mounting holes to fit different types of chassis.
Make sure that the locations of all the mounting holes for both motherboard and
chassis match. Although a chassis may have both plastic and metal mounting fas-
teners, metal ones are highly recommended because they ground the motherboard
to the chassis. Make sure that the metal standoffs click in or are screwed in tightly.
Then use a screwdriver to secure the motherboard onto the motherboard tray.

Tools Needed

Phillips Screwdriver
Pan head screws (11 pieces)
Standoffs (11 pieces, if needed)

Location of Mounting Holes

There are eleven (11) mounting holes on this motherboard indicated by the arrows.
Caution: 1) To avoid damaging the motherboard and its components,
please do not use a force greater than 8 lb/inch on each mounting screw
during motherboard installation. 2) Some components are very close to the
mounting holes. Please take precautionary measures to avoid damaging
these components when installing the motherboard to the chassis.
IPMI CODE
BIOS
LICENSE
X10DRT-B+
Rev. 1.01
BAR CODE
2-14

Advertisement

Table of Contents
loading

Table of Contents