Motherboard Features - Supermicro X10DRT-B+ User Manual

Motherboard Features

CPU
Memory
Chipset
Expansion
Slots
Graphics
Network
I/O Devices
Peripheral
Devices
•
Dual Intel E5-2600 (v3/v4) Series processors
®
(Socket R3 LGA 2011); each processor supports two
full-width Intel QuickPath Interconnect (QPI) links
(with Data Transfer Rate of up to 9.6 GT/s per QPI)
Notes: 1. E5-2600v4 requires Revision 2.0
BIOS (or higher). 2. E5-2600v3 is fully back-
ward compatible with all BIOS revisions.
•
Integrated memory controller supports up to 3072GB
of Load Reduced (LRDIMM), Non-Volatile (NV-
DIMM), and Registered (RDIMM) ECC DDR4 (288-
pin) memory of up to 2400 MHz in 24 slots
Note: Memory speed support is pending on
the processors installed in the system. For
the latest CPU/memory updates, please refer
to our website at http://www.supermicro.com/
products/motherboard.
DIMM Sizes
Up to 128GB at 1.2V
•
Intel® PCH C612
•
Two (2) PCI-E 3.0 x16 slots (supported by CPU1 &
CPU2) (SLOT1 & SLOT2)
•
One (1) PCI-E 3.0 x4 slot (supported by CPU1) and
SATA connections (I-SATA0-5 & S-SATA 0-2) (SXB1)
•
One (1) PCI-Exp 3.0 x24 slot (supported by CPU2)
(SXB2)
•
ASpeed AST2400 Baseboard Management Control-
ler (BMC) with integrated graphics controller
•
One dedicated IPMI LAN supported by the ASpeed
2400 BMC located on the rear I/O panel
IPMI 2.0
•
IPMI 2.0 supported by the ASpeed 2400 BMC
VGA
•
Rear VGA Port
USB Devices
•
Two (2) USB 3.0 ports on the rear I/O panel (USB0/1)
1-7
Chapter 1: Overview