Using A Rhythm From A Disk; Inserting And Ejecting A Floppy Disk - Roland 60S Owner's Manual

Chapter 2 Using Rhythm Performance

Using a Rhythm from a Disk

The AT-90S/80S/60S contains built-in Rhythms (Music Styles). Additional
Rhythms (Music Styles) are available on the Music Style disk included are
available. Here's how to select a Rhythm (Music Style) from a Music Style
disk.

Inserting and Ejecting a Floppy Disk

1.
Hold the floppy disk face up, and push it into the disk drive
until it clicks into place.
The disk drive is on the right side of the unit, above the keyboard.
fig.02-18
Indicator
2.
Press the Eject button.
The end of the floppy disk comes out of the slot. Gently grasp the end of the
floppy disk and pull it out.
fig.02-19
68
Eject button
Floppy Disk
Eject Button
Max Max Max Max
Min Min Min Min
Harmony Intelligence
NOTE
If you're using the disk
drive for the first time, be
sure to read the important
notes on p. 6.
NOTE
Never eject a disk while
reading or writing is in
progress, since that can
damage the magnetic
surface of the disk,
rendering it unusable. (The
disk drive's indicator will
light up at full brightness
when the drive is busy
reading or writing data.
Ordinarily, the indicator
will be less brightly lit, or
be extinguished.)