Using The Foot Switches - Roland 60S Owner's Manual

Using the Foot Switches

On either side of the expression pedal are two Foot Switches. Different
functions are assigned to each of these two foot switches.
fig.04-07
With the factory settings, the following functions are assigned to the left and
right Foot Switches.
Right Foot Switch
Left Foot Switch
1.
Press the right Foot Switch toward the right.
If Rotary is turned on, the Rotary effect will switch between "Fast" and
"Slow" each time you press the Foot Switch.
2.
Press the left Foot Switch toward the left.
While you are pressing the Foot Switch, the pitch will be temporarily
lowered. When you release the Foot Switch, the pitch will return to normal.
Switch the Rotary effect between Fast/Slow.
Glide (an effect by which the pitch is lowered by a semi-
tone while the foot switch is pressed, and is returned to
what is originally was when you release your foot).
Chapter 4 Using the Performance Functions
You can also change the
functions assigned to the
left and right Foot
Switches. Please refer to
"Changing the Function
of the Foot Switch" (p.
160).
The Glide effect will only
be applied to the keyboard
section that has been
specified as being the
destination for the Pitch
bend/Vibrato lever. Please
refer to "Selecting the
Range of Keys to Which
the Pitch Bend/Vibrato
Lever will Apply" (p. 163).
NOTE
If "Regist Shift" is turned
"RIGHT" or "LEFT," the
foot switch will function
only to switch registrations
(p. 161).
105