Loading Performance Songs Into The At-90S/80S/60S - Roland 60S Owner's Manual

Chapter 7 Recording/Playing Back What You Play
If the following screen appears
If you select a number at which a performance data has
already been saved and touch <Save>, the following screen
appears.
fig.E-62
If you wish to update the contents of the
performance data
1.
Touch <OK>.
If you wish to save the data without erasing
the performance data already on disk you
must rename the song
1.
Touch <Cancel> to stop the Save operation.
2.
In the Song Save/Song Delete screen, select the
number that is displayed as "-----" (a number that
currently does not contain performance data).
3.
Save the performance data.
When saving is complete, the saved performance name
will be displayed.
What is the SMF Format?
SMF (Standard MIDI File) is a data format that was
created to provide music files compatibility between
manufacturers.
140
Max Max Max Max
Min Min Min Min
Loading Performance Songs
Into the AT-90S/80S/60S
To edit (p. 149) or re-record a performance song that is stored
on a floppy disk, you must first load that song into the
instrument.
1.
Insert the floppy disk into the disk drive.
2.
Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
3.
Touch <Utility>.
The Utility screen appears.
4.
Touch <Song Select>.
The Song Select screen appears.
fig.07-31_50
5.
Touch < >< > to select the performance data
that you wish to load into internal memory.
6.
Touch <Load>.
fig.07-32_50
The selected performance data will be loaded into
internal memory.
Harmony Intelligence