Adjusting The Pan And Effect Depth - Roland 5100011346 -01 Owner's Manual

Adjusting the Pan and Effect Depth

You can specify the pan (stereo position) of each part, and adjust the depth of the reverb and chorus effects for each
part.
1.
Press the [PART] button a number of times to access the Part Edit screen.
page_part_edit-1.eps
2.
Turn the [VALUE] dial to select the effect whose settings you want to adjust, and then press the
[ENTER] button.
page_part_edit-3.eps
Setting
Pan
Reverb Send
Chorus Send
3.
Turn the [VALUE] dial to adjust the setting.
The pan and effect settings you specify will be saved in internal memory if you save the studio set (p. 54).
Value Explanation
0–127 Left/right balance of the sound.
0–127 Depth of reverb. Choose "0" if you don't want to apply reverb.
0–127 Depth of chorus. Choose "0" if you don't want to apply chorus.
Using the SD-50 as a MIDI Sound Module
51