“Roland Digital Piano” will be displayed for the MIDI port name. • The RD-64 does not have the A-88’s “UPPER, ” “LOWER, ” “DUAL” and “SPLIT” functionality (the chapter “Layering Two Parts” in the A-88 Owner’s Manual).
Using the RD-64 as a Piano (Piano Mode) ..........2 Using the RD-64 as a MIDI Controller Keyboard (Controller Mode) .....2 Placing the RD-64 on a Stand .
In Piano mode this will remain lit, and pressing it will not do anything. This button is used only when you’ve connected a “SuperNATURAL compatible sound module” in Controller mode. For details, refer to “Using the RD-64 as a MIDI Controller Keyboard (Controller Mode)” (p. 2)
Page 6
EQ [LOW], [HIGH] knob Adjusting the upper and lower ranges (Equalizer) The RD-64 is equipped with a two-band equalizer. You can adjust the level of the low-frequency range and high-frequency range for each tone. * The equalizer settings are stored (Hold down the [SuperNATURAL] button, and press [A. PIANO] and [ORGAN] buttons simultaneously to store all 12 tones).
USB COMPUTER port Included Damper Pedal Unit Pedal (sold separately; If the RD-64 is connected to your RPU-3) computer using a commercially available USB cable, you can use MIDI-compatible software to record and play back the RD-64’s performance (MIDI data).
Changing Settings (FUNCTION Mode) In FUNCTION mode, you can adjust the keyboard touch. How to read the procedural explanations Press the [FUNCTION] Press the key that has “VELO CURVE” Press the keys that have “NUMERIC ENTRY” printed above them. button. printed above it.
WARNING With the factory settings, the RD-64 will automatically be switched off four hours after you stop playing or operating the unit. If you don’t want the unit to turn off automatically, change the “AUTO OFF” setting to “OFF” as described below.
Troubleshooting If the RD-64 does not function in the way you expect, first check the following points. If this does not resolve the problem, consult your dealer or a nearby Roland Service Station. Problem Check/Solution Page Are the RD-64’s AC adaptor and power cord properly plugged into a power source as well as Power won’t turn on...
Refer all servicing to your retailer, • If smoke or unusual odor occurs; or Use only the included power cord the nearest Roland Service Center, or an • Objects have fallen into, or liquid has authorized Roland distributor, as listed on Use only the attached power-supply cord.
Page 12
Use only the specified stand (s) This unit is designed to be used in combination with specific stands (KS-12, KS-18Z) manufactured by Roland. If used in combination with other stands, you risk sustaining injuries as the result of this product dropping down or toppling over due to a lack of stability.
Rubbing too hard in the same area can Properties Limited (TPL). Roland has licensed this damage the finish. • With the factory settings, the RD-64 will technology from the TPL Group. automatically be switched off four hours after you •...
Controlling an External MIDI Sound Module in Piano Mode In the RD-64’s Piano mode you can specify the MIDI channel and transmit MIDI messages such as bank select, program change, and aftertouch to an external MIDI sound module. For details, refer to the A-88 owner’s manual sections “Setting the MIDI Transmit Channel (MIDI CHANNEL), ” “Switching Sounds, ”...
Page 18
Compliance Information Statement Model Name : RD-64 Type of Equipment : Digital Piano Responsible Party : Roland Corporation U.S. Address : 5100 S. Eastern Avenue, Los Angeles, CA 90040-2938 Telephone : (323) 890-3700 For EU Countries This product complies with the requirements of EMC Directive 2004/108/EC.