Storage; [7] After-Sale Service; 7-1 Warranty And Provision; Repair - Sanwa PC710 Instruction Manual

Battery door
Screw
for the battery door

6-4 Storage

1. The panel and case are not resistant to volatile solvents. Do not wipe
out with solvents or isopropyl alcohol. Clean the instrument up with a
dry soft cloth.
2. The panel and case are not resistant to heat. Keep it away from heat-
generating devices such as solder irons.
3. Do not save the instrument into vibratory places or where the
instrument may fall off.
4. Do not expose the instrument to direct sunlight and do not save it
into any places with extreme temperature, humid, or condensation.
5. Remove the battery for saving the instrument over a long period of
time.
Save the instrument into an appropriate place, according to the
precautions above.
― 49 ―
Rear case
Battery
Fuse
0.63A/500V
φ6.3×32mm
Breaking capacity ： 50kA
Part number ： F1198
Fuse
12.5A/500V
φ6.3×32mm
Breaking capacity ： 20kA
Part number ： F1199
CAUTION

[7] AFTER-SALE SERVICE

7-1 Warranty and Provision

Sanwa offers comprehensive warranty services to its end-users
and to its product resellers. Under Sanwa's general warranty
policy, each instrument is warranted to be free from defects in
workmanship or material under normal use for the period of one
(1) year from the date of purchase.
This warranty policy is valid within the country of purchase only,
and applied only to the product purchased from Sanwa authorized
agent or distributor.
Sanwa reserves the right to inspect all warranty claims to
determine the extent to which the warranty policy shall apply. This
warranty shall not apply to disposables batteries, or any product or
parts, which have been subject to one of the following causes:
1. A failure due to improper handling or use that deviates from the
instruction manual.
2. A failure due to inadequate repair or modification by people
other than Sanwa service personnel.
3. A failure due to causes not attributable to this product such as
fire, flood and other natural disaster.
4. Non-operation due to a discharged battery.
5. A failure or damage due to transportation, relocation or dropping
after the purchase.

7-2 Repair

Customers are asked to provide the following information when
requesting services:
1. Customer name, address, and contact information
2. Description of problem
3. Description of product configuration
4. Model Number
5. Product Serial Number
6. Proof of Date-of-Purchase
7. Where you purchased the product
Please contact Sanwa authorized agent / distributor / service
― 50 ―