Instant Pot MAX Series User Manual page 17

Initial Test Run ( 15 psi Water Test)
10
When the Smart Program
has completed, 10 beeps
will sound.
13
Once the Pressure
Indicator has turned
OFF you may open the
lid.
INSTANT TIP: Making On-the-Fly Changes
You can make on-the-fly changes during the cook cycle
of any Smart Program.
Touch the field you want to change: [Pressure], [Temperature], [Keep Warm] or
1
[Venting] and then make the adjustment by toggling to the correct setting.
Touch the [Start] key or wait 5 seconds for a beep to sound. The cook cycle will
2
resume.
Within the [Sauté], [Yogurt], and Manual [Keep Warm] Smart Programs, on-the-fly
temperature changes are limited to Low and High options. To select and adjust a
Custom setting, touch [Cancel], then re-key in your desired cooking commands. In the
[Temperature] field, you may toggle between Low and High freely, but you will not
have the option to adjust to a Custom temperature setting. To select a Custom
setting, touch [Cancel], then re-key in your desired cooking commands.
11
A short warning burst
followed by a continuous
stream of steam will be
released.
14
Turn the lid counter
clockwise to open until a
jingle sounds.
12
The float valve will drop
to indicate the pressure
has been fully released.
15