Instant Pot MAX Series User Manual page 12

Getting Started
4
Remove & Install the
Steam Release Assembly
Remove the Steam Release Cover: Turn the
steam release cover counter-clockwise until it can
be pulled off from the lid.
Remove the Steam Release Valve: Pull the
steam release valve up and off the steam
released pipe.
Install the Steam Release Valve: Place the
steam release valve onto the steam release pipe
and press down.
Install the Steam Release Cover: Place the
steam release cover over the steam release
valve and turn the steam release cover clockwise
until it locks securely in place.
Note: The steam release valve will pop into place, but
will fit loosely when it is seated properly in place—this is
required for proper function. You should feel some
resistance as you remove or install the steam release
valve. This part should be inspected and cleaned
frequently, especially after cooking the foamy foods.
5 Remove & Install the Anti-Block Shield
To remove: Grip the lid like a steering wheel. Using
your thumbs for leverage, press firmly against the
side of the anti-block shield (pressing towards the
side of the lid and up) until it pops off. The anti-block
shield will snap off of the prongs underneath.
To install: Press the anti-block shield over the prongs
and press down until it snaps into place.
Note: The anti-block shield prevents food particles from
clogging the steam release pipe. These fine particles can
become trapped underneath the shield and prevent
pressure regulation. The anti-block shield should be
removed for regular cleaning.
10
Steam Release Steam Release
Valve Cover
Steam Relase
Pipe
Anti-Block
Shield