Table of Contents
Advertisement
SuperServer 2028BT-Hxxx User's Manual
When SEL is Full
This feature allows the user to determine what the BIOS should do when the system
event log is full. Select Erase Immediately to erase all events in the log when the
system event log is full. Please note that you will need to reboot the system for
the changes to take effect. The options are Do Nothing and Erase Immediately.
BMC Network Configuration
IPMI LAN Selection
Use this feature to select the type of the IPMI LAN. The default setting is Failover.
IPMI Network Link Status
This item indicates the status of the IPMI Network Link. The default setting is
Shared LAN.
Update IPMI LAN Configuration
Select Yes for the system BIOS to automatically reset the following IPMI settings
at next system boot. The options are Yes and No.
Configuration Address Source
Use this item to select the IP address source for this computer. If Static is selected,
you will need to know the IP address of this computer and enter it to the system
manually in the field. If DHCP is selected, AMI BIOS will search for a DHCP
(Dynamic Host Configuration Protocol) server attached to the network and request
the next available IP address for this computer. The options are DHCP Unspecified,
and Static.
Station IP Address
This item displays the Station IP address for this computer. This should be in decimal
and in dotted quad form (i.e., 192.168.10.253).
Subnet Mask
This item displays the sub-network that this computer belongs to. The value of each
three-digit number is separated by dots and it should not exceed 255.
Station MAC Address
This item displays the Station MAC address for this computer. Mac addresses are
6 two-digit hexadecimal numbers.
Gateway IP Address
This item displays the gateway IP address for this computer.
6-34
Advertisement
Table of Contents
