Editing In A Graphic Display (Zoom Edit); Initializing Patch Settings (Init) - Roland Fantom-X6 Owner's Manual

8.
Repeat steps 5-7 to set each parameter you want to edit.
9.
If you wish to save the changes you've made, press
[WRITE] to perform the Save operation (p. 59). If you do not
wish to save changes, press [EXIT] to return to the Patch
Play screen.
If you return to the Patch Play screen without saving, an "*"
will be displayed at the left of the patch number, indicating that
the patch settings have been edited.
If you turn off the power or select a different sound while the
display indicates "*," your edited patch will be lost.
In stead of using [F1] or [F2] in the patch edit screen, you can
also select the edit group by holding down [SHIFT] and
pressing or . It is convenient to use this feature when
the Tone SW/Select window is displayed.
Editing in a Graphic Display
(Zoom Edit)
You can edit while viewing a graphic display of the most frequently
used important parameters.Zoom Edit lets you edit the following
parameters.
Parameter page
Pitch Envelope p. 68
TVF p. 69
TVF Envelope p. 71
TVA Envelope p. 72
1.
Press [PATCH/RHYTHM] to access the Patch Play screen,
and select the part (keyboard part or pad part) and patch
that you want to edit.
2.
Press [PATCH EDIT], and then press [F3 (Zoom Edit)].
The Zoom Edit screen will appear.
fig.06-002_50
3.
The parameters are organized into several edit groups.
Press [F1]–[F4] to select the tab for the parameters that you
want to edit.
• To switch the parameter you want to edit
Press [F6].
• To switch to a different part for editing
Press [F7 (Part Select)].
• To select a tone for editing or switch a tone on/off
Press [F8 (Tone Sw/Sel)].
Parameter page
Structure Type p. 63
LFO 1/2 p. 74
Step LFO p. 74
4.
Use [CURSOR] to move the cursor to the parameter that
you want to edit.
You can use the realtime control knob to set the value.
5.
Turn the VALUE dial or use [INC][DEC] to modify the value.
6.
When you have finished editing, press [EXIT].

Initializing Patch Settings (Init)

"Initialize" means to return the settings of the currently selected
sound to a standard set of values.
The Initialize operation will affect only the currently selected
sound; the sounds that are stored in user memory will not be
affected. If you wish to restore all of the Fantom-X's settings to
their factory values, perform a Factory Reset (p. 235).
1.
Press [PATCH/RHYTHM] to access the Patch Play screen,
and select the part (keyboard part or pad part) and patch
that you want to initialize (p. 39).
2.
Hold down [SHIFT] and press [F1 (Init)].
A message will ask you for confirmation.
3.
Press [F8 (Exec)].
The initialization will be carried out, and you'll be returned to
the previous screen.
To cancel, press [F7 (Cancel)].
Creating a Patch
57