Control Pedal; Transpose (Trans) - Roland Fantom-X6 Owner's Manual

Control Pedal

If an optional expression pedal or pedal switch (EV-5, DP-2.) is connected to the rear panel
PEDAL CONTROL jack, you can use the pedal to control the volume or various function.
fig.02-011

Transpose (Trans)

You can transpose the pitch of the keyboard in semitone steps, over a range of G–F# (-5– +6
semitones) by adjusting the Transpose parameter's value.
Press [CURSOR] to move the cursor to "Trans" in the upper part of the screen, and turn the
VALUE dial or press [INC] or [DEC] to change its setting.
fig.02-012
Various Performance Features
The way in which the sound
changes will depend on the
settings. For details on settings
for parameters controlled by
the pedal, refer to "Making
Control Pedal Settings"
("Making Control Pedal
Settings" (p. 126)).
Use only the specified
expression pedal or pedal
switch (EV-5, DP-2; sold
separately). By connecting any
other expression pedals, you
risk causing malfunction and/
or damage to the unit.
For details, refer to
"Transposing the Keyboard in
Octave Units (Octave Shift)"
("Transposing the Keyboard
in Octave Units (Octave
Shift)" (p. 45)).
25