Roland Fantom-X6 Owner's Manual page 117

Knob
fig.09-016_50
For details on these settings, refer to "Selecting the Parameter
Controlled by the Realtime Controllers or D Beam
Controller (Control Setting)" (p. 114).
Knob parameters are valid only when the REALTIME
CONTROL button is set to "ASSIGNABLE."
Knob Assign 1–4
(Realtime Control Knob Assign 1–4)
Specify the functions that will be controlled by the [
Value
CC01–31, 33–95: Controller numbers 1–31, 33–95
For more information about Control Change messages, please
refer to "MIDI Implementation" (p. 298).
Pitch Bend: Pitch Bend
Aftertouch: Aftertouch
Arp Style: Arpeggio Style
Arp Grid: Arpeggio Grid
Adjusts the duration of each arpeggiated note
Arp Duration:
Arp Motif: Arpeggio Motif
Chord form of the Chord Memory function
Chord Form:
Master Level: The volume of the entire Fantom-X
* Master Level adjusts the volume both of the OUTPUT A jacks and the
DIGITAL OUT jack. The panel VOLUME knob only adjusts the
volume of the OUTPUT A jacks.
Arp Step: Controls the playback position of the arpeggio
pattern.
Digital In: Input level from DIGITAL IN.
Switch
fig.09-017_50
For details on these settings, refer to "Selecting the Parameter
Controlled by the Realtime Controllers or D Beam
Controller (Control Setting)" (p. 114).
Switch 1/2 (Assignable Switch 1–2)
Specify the functions that will be controlled by the [
buttons.
Value
Transpose Down: Lowers the key range in semitone steps (up to 5
] knobs.
Transpose Up:
Tap Tempo:
Mono/poly:
Portamento:
Hold:
MFX1–3 Sw:
Chorus Sw:
Reverb Sw:
Mastering Sw:
Loop:
Rhythm Start/Stop: Rhythm pattern playback On/Off
Creating a Performance
semitones lower).
Raises the key range in semitone steps (up to 6
semitones higher).
Tap tempo (a tempo specified by the interval at
which you press the button).
Pressed to toggle between polyphonic (POLY)
and monophonic (MONO) play of a patch.
Portamento On/Off
Hold play On/Off
Multi-effect 1–3 switch
Chorus switch
Reverb switch
Mastering switch
Loop play On/Off
]/[ ]
117