Roland Fantom-X6 Owner's Manual page 291

74: ENHANCER → DELAY
fig.MFX-74
L in
Enhancer
Mix
R in Enhancer
Mix
Parameter Value
Enhancer Sens # 0–127
Enhancer Mix # 0–127
Delay Time 0–2600 ms, note
Delay -98– +98 %
Feedback #
Delay HF Damp 200–8000 Hz,
BYPASS
Delay Balance # D100:0W–D0:100W
Level 0–127
75: CHORUS → DELAY
fig.MFX-75
Balance D
L in
Balance W
Chorus
Balance W
R in
Balance D
Parameter Value
Chorus Pre 0.0–100.0 ms
Delay
Chorus Rate # 0.05–10.00 Hz, note
Chorus Depth 0–127
Chorus D100:0W–D0:100W
Balance #
Delay Time 0–2600 ms, note
Delay -98– +98 %
Feedback #
Delay HF 200–8000 Hz,
Damp BYPASS
Delay D100:0W–D0:100W
Balance #
Level 0–127
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Description
Sensitivity of the enhancer
Level of the overtones gener-
ated by the enhancer
Adjusts the delay time from
the direct sound until the de-
lay sound is heard.
Adjusts the proportion of the
delay sound that is fed back
into the effect. Negative (-)
settings will invert the phase.
Adjusts the frequency above
which sound fed back to the
effect will be cut. If you do not
want to cut the high frequen-
cies, set this parameter to BY-
PASS.
Adjusts the volume balance
between the sound that is sent
through the delay (W) and the
sound that is not sent through
the delay (D).
Output Level
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Description
Adjusts the delay time from the
direct sound until the chorus
sound is heard.
Frequency of modulation
Depth of modulation
Volume balance between the di-
rect sound (D) and the chorus
sound (W)
Adjusts the delay time from the
direct sound until the delay
sound is heard.
Adjusts the proportion of the
delay sound that is fed back into
the effect. Negative (-) settings
will invert the phase.
Adjusts the frequency above
which sound fed back to the ef-
fect will be cut. If you do not
want to cut the high frequen-
cies, set this parameter to BY-
PASS.
Adjusts the volume balance be-
tween the sound that is sent
through the delay (W) and the
sound that is not sent through
the delay (D).
Output Level
76: FLANGER → DELAY
fig.MFX-76
Balance D
L in
Feedback
Balance W
Flanger
Balance W
R in
Balance D
Parameter Value
Flanger Pre 0.0–100.0 ms
Delay
Flanger Rate # 0.05–10.00 Hz, note
Flanger Depth 0–127
Flanger -98– +98 %
Feedback #
Flanger D100:0W–D0:100W
Balance #
Delay Time 0–2600 ms, note
Delay -98– +98 %
Feedback #
Delay HF 200–8000 Hz,
Damp BYPASS
Delay D100:0W–D0:100W
Balance #
Level 0–127
Effects List
L out
Balance D
Balance W
Delay
Balance W
Feedback
R out
Balance D
Description
Adjusts the delay time from
when the direct sound begins
until the flanger sound is
heard.
Frequency of modulation
Depth of modulation
Adjusts the proportion of the
flanger sound that is fed back
into the effect. Negative (-) set-
tings will invert the phase.
Volume balance between the
direct sound (D) and the
flanger sound (W)
Adjusts the delay time from
the direct sound until the delay
sound is heard.
Adjusts the proportion of the
delay sound that is fed back
into the effect. Negative (-) set-
tings will invert the phase.
Adjusts the frequency above
which sound fed back to the ef-
fect will be cut. If you do not
want to cut the high frequen-
cies, set this parameter to BY-
PASS.
Adjusts the volume balance be-
tween the sound that is sent
through the delay (W) and the
sound that is not sent through
the delay (D).
Output Level
291