Maico MI 34 Operating Instructions Manual page 50

Operating Instructions MI 34 / MI 34 H
Besides cleaning the holes ensure also a proper surface cleaning of the
transparent sealing.
After cleaning all the acoustic and air pressure channels of the probe tip it
can be reassembled. Make sure that the Probe Tip is connected correctly
onto the Transducer Housing – a small flange will ensure correct positioning
- before the plastic nut is gently tightened.
Figure 42
Figure 43:
The cleaning tool: (Consisting of 3 parts: cleaning hooks, wire with brush and
hand grip)
Figure 44:
With the hook of the cleaning tool you can remove cerumen from the ear
tips.
49
GEBAmi34e.11a.docx 850 232/14 08/11