Safety Warning - NAMCO Prop cycle Operator's Manual

In order to use this machine safely, be sure to read this Installation and commissioning
manual carefully before installation, adjustment or use of this machine.
Whenever the owner of this machine entrusts disassembly, installation, adjustment or
routine maintenance to another person, the owner should ensure that that person read
the appropriate precautions and relevant sections of this manual before starting work.
In order that no accidents occur when the machine is in operation, strictly follow
the notes on safety described below. Also, carefully read section (X), "Precautions".
NOTE: Only operate this machine after checking that it has been installed correctly
and in accordance with the Installation and Commissioning Manual.
NOTE: Parts of this machine move during game play, so there are places where the
distance between the stationary section and moveable section changes. There
are warning notices to keep hands and feet clear of moving parts, however if
the operator feels that a person is in any danger, he should warn that person
accordingly.
NOTE:
The warning notices must always be kept in good condition and replaced if
worn, so that the customer can read them clearly.
NOTE: If there is an error or problem with the machine, operation must be
stopped immediately and the problem rectified before any further use.
NOTE: Installation, Service, Adjustments and Routine Maintenance should be carried
out by qualified personnel only.
Warnings for Disassembly, Installation, Routine Maintenance and Troubleshooting.
DANGER: Namco Ltd. bears absolutely no responsibility for accidents, injury or damage
resulting from unauthorized changes to this machine.
DANGER: Ensure that the machine has been turned OFF before making adjustments or
carrying out maintenance. Also ensure only qualified personnel turn the power
ON to this machine.
DANGER: The power supply and inside the monitor will remain hot and have areas of
high voltage even though the machine has been turned OFF, and there is the
possibility of burns or electric shock. Be careful not to touch these areas.
DANGER:
In order to prevent injury due to mis-operation, be sure that the voltage of the
main power supply is within the prescribed limits. Also to prevent possible
electric shock due to failure, this machine MUST be fitted with a securely
connected earthed plug.
NOTE: Do not turn the power switch ON until the machine has been installed correctly.

SAFETY WARNING

Warnings for Operation ( Requirements)