Replacing The Fluorescent Tube - NAMCO Prop cycle Operator's Manual

7-5 Replacing the Fluorescent Tube

DANGER; To prevent electric shock, ensure machine is switched OFF
before commencing work.
1) Remove the ten socket button head screws (M5x12), and remove the side
vac-forms. (five screws on each vac-form)
2) Remove the two countersunk screws (M5x12) from the bottom of the
acrylic.
3) Remove the two socket button head screws (M4x25), and remove the
header acrylic retaining bracket.
4) Remove the header acrylic.
5) Replace the fluorescent tube and/or the starter.
6) Re-assemble in reverse order.
Page 30