Advertisement
Hardware
The following describes the front panel, rear panel and LED indicators of the Signamax 065-7007 5-port and 065-7012 8-port
10/100BaseT/TX Ethernet Mini Switches.
Front Panel
LED Indicators
LED
Power
Link/Act
Rear Panel
1.
RJ-45 Ports
Five/eight Ethernet Mini RJ-45 UTP ports all come with Auto-negotiation and operate at 10/100 Mbps for connection to servers and hubs. All ports can be
configured for Full/Half-Duplex mode
2.
Auto-MDIX Function
Any port can be used to connect to other switches or hubs without using a crossover cable.
3.
Power Connector
Used to connect the external 5V DC power adapter that connects to power outlet.
Network Connection
The following sections describe the connections of both the Signamax 065-7007 5-port and 065-7012 8-port 10/100BaseT/TX
Ethernet Mini Switches.
PC to Switch
A PC can be connected to the Signamax Mini Switch via a two-pair Category 3/4/5 UTP/STP straight cable. The PC (equipped
with a RJ-45 10/100BaseT/TX 10/100 Mbps jack) should be connected to any of the eight ports.
Note: The LED indicators for PC connection are dependant on the LAN card capabilities. If LED indicators are not illuminated after making a proper connection,
check the PC LAN card, the cable, the N-Way Mini Switch conditions, and the connections.
Switch to Hub
A hub (10BaseT or 100BaseTX) can be connected to the Signamax Mini Switch via a two-pair Category 3/4/5 UTP/STP straight
cable. The connection is accomplished from any normal port of the Signamax Mini Switch to the any port of the connected hub.
Technical Specification
Standards:
Protocol:
Topology:
Transmission Method:
Transfer Rate:
Media:
No. of Ports:
RAM Buffer:
Filtering Address Table:
Packet Filtering/Forwarding Rate:
Power:
Consumption:
Temperature:
Humidity:
Conformance:
065-7007A 5-port and 065-7012A 8-port 10/100BaseT/TX Ethernet Mini Switches
065-7007 5-port and 065-7012 8-port 10/100BaseT/TX Ethernet Mini Switches
Color
Status
Description
Green
On
Power on
Green
On
Link status of connected port
Flashing
Data Transmission Status of connected port
IEEE802.3 10BaseT Ethernet, IEEE802.3u 100BaseTX Fast Ethernet,
ANSI/IEEE std 802.3 N-Way auto-negotiation, IEEE802.3 Frame types: Transparent,
IEEE802.Sx flow control for Full-Duplex, Back Pressure flow control for Half-Duplex,
Auto-MDIX Function
CSMA/CD
Star
Store-and-forward
Ethernet: 10Mbps (Half-Duplex); 20Mbps (Full-Duplex)
Fast Ethernet: 100Mbps (Half-Duplex); 200Mbps (Full-Duplex)
10BaseT: 2-Pair UTP Cat. 3,4,5 (100m); EIA/TIA-568 100-ohm STP (100m)
100BaseTX: 2-Pair UTP Cat. 5 (100m); EIA/TIA-568 100-ohm STP (100m)
Five/Eight 10/100 Mbps RJ-45 ports
Total 128K bytes per device
1K
Wire-speed per port (for 100Mbps & 10Mbps)
External Power Adapter 5V DC 0.6 A
3 watts maximum
Operating: 32°C ~ 113°F (0°C ~ 45°C), Storage: 32°F ~ 140°F (0°C ~ 60°C)
Operating: 10% ~ 90%, Storage: 5% ~ 95%
FCC Class B, CE Mark Class B
User's Guide
Number of LED
1
8 (model 065-7012)
5 (model 065-7007)
Advertisement
