Table of Contents
Advertisement
2.4.6
Expansion module Installation (Optional)
MIC-7500 supports two kinds of optional modules for different applications.
32bit GPIO module, P/N: AIIS-DIO32-00A1E
4 x Isolation COM module, P/N: 98R2C48510E
1.
Undo the 4 screws and remove the bottom cover.
2.
Undo HDD tray & expansion module baffle.
5
3.
Remove COM cable and undo baffle cover.
4.
Assemble module on M/B (Note: 32Bit GPIO module needs to connect with a
cable. (Please refer to MB internal I/O connector specification at IO connector
page for GPIO connector.)
5.
Assemble module baffle with screws.
6.
Replace bottom cover and secure with screws.
4
4
4
19
MIC-7500 User Manual
Advertisement
Table of Contents
