Rigol DG4162 User Manual page 37

Chapter 1 Quick Start
15. Modes
Mod----Modulation
Generate the modulated waveforms. Provide various analog modulation and
digital modulation modes and can generate AM, FM, PM, ASK, FSK, PSK, BPSK,
QPSK, 3FSK, 4FSK, OSK or PWM modulated signal.
Support internal and external modulations.

Sweep----Sweep
Generate the frequency sweeping signal of Sine, Square, Ramp and Arbitrary
Waveforms (except DC).
Support three sweep types: Linear, Log and Step.

Support three trigger sources: Internal, External and Manual.

Provide the "Mark" function.

When the function is enabled, the backlight of the button turns on.

Burst----Burst
Generate burst waveforms of Sine, Square, Ramp, Pulse and Arbitrary
waveform (except DC).
Support three burst types: N Cycle, Infinite and Gated.

Noise can also be used to generate Gated burst.

Support three trigger sources: Internal, External and Manual.

When the function is enabled, the backlight of the button turns on.

Note: When the instrument is working in remote mode, you can return it back
to local mode by pressing Burst.
16. Return
This key is used to return to the previous menu.
17. Shortcuts/Utility
Print----Print
It is used to execute the print function to save the content displayed on the
screen as image in USB storage device.
Edit----Waveform Edit Shortcut Key
This key is the shortcut of "Arb  Edit Wform" and is used to quickly open
the arbitrary waveform editing interface.
DG4000 User's Guide
RIGOL
1-11