Table of Contents
Advertisement
4.
Split the sample by filling
two 10-mL sample cells to
the 10-mL mark. Cap one of
the cells, this is the blank.
Exactly 10 mL is not
Note:
critical for the blank. Make
sure the other cell contains
10 mL.
Molybdenum, Molybdate, LR,
5.
Using the calibrated
dropper, add 0.5 mL of
Molybdenum 2 to the
sample in the uncapped 10-
mL cell. Cap the cell and
swirl to mix. Wait two
minutes for full color
development.
1—35
continued
6.
Wipe the sample cells
free of liquid. Any liquid
entering the sample cell
compartment can cause
damage to the instrument.
Advertisement
Table of Contents
