Advertisement
Using the Antenna Internally
When using the antenna internally, take care to ensure that the antenna or cables do not cause a
trip hazard.The antenna can be fitted to the supplied desk stand for internal use.
Optimum performance will be achieved with the antenna facing a window in the direction of best
network signal strength.
Mounting and dismounting the antenna to the desk stand
Once you have determined the desired mounting location and orientation you can mount and un-
mount the antenna to the supplied desk stand following the steps below.
Mounting the antenna
Hold the antenna cable securely upwards against
the back of the antenna.
Push the mounting foot of the antenna down
into the groove in the base so that the mount-
ing holes sit flush with the pegs in the base as
shown.
Holding the antenna and base securely push the
antenna back into the base until the pegs locate.
Important Safety Information
RF Safety Note
– Ensure that the antenna is mounted in such a way that no person is likely to be
within a distance of 1 metre from the front of the antenna during use.
Electical Caution
– Parts of this antenna are an electrical conductor. Contact with power lines can
result in death or serious injury. The antenna and supporting mast must not be close to any power
lines during installation, use or removal.
Panorama Antennas Ltd l Frogmore l London l SW18 1HF l United Kingdom
T: +44 (0)20 8877 4444 l F: +44 (0)20 8877 4477 l E: sales@panorama-antennas.com
The WM11 Antenna Range
Dismounting the antenna
Grip the base securely from below and the an-
tenna at the top edge.
Pull the top of the antenna away from the base
stand whilst lightly squeezing the base in order to
pivot the foot of the antenna out of the trough in
the desk stand as shown.
Once the foot of the antenna is unlocked from
the desk stand pull the antenna forwards and
upwards from the base freeing the antenna from
the mounting pegs.
Installation Guide
Advertisement
