Table of Contents
Advertisement
10
Turn the water supply back off. Feed
the electrical cable into the shower
unit. Strip the insulation and fit an earth
sleeve (not supplied). Secure the wires
firmly into the terminal block.
12
Install the shower fittings provided with
this shower, see "Installation of the
Shower Fittings".
(Live) = Brown Wire
L
(Protective Earth) =
Green / Yellow
Sleeved Wire
(Neutral) = Blue Wire
N
11
Refit the service tunnel. Align the
controls with the spindles and refit the
cover. Secure with screws supplied.
DO NOT trap any wires.
DO NOT use alternative screws to
secure the cover. This can cause
internal damage to the shower unit.
13
The shower must be commissioned
before use, see "Commissioning" for
full instructions.
15
1265606-W2-A
Hide quick links:
Advertisement
Table of Contents
