Mira Elite QT Installation & User Manual page 19

3
Start shower running, water is cold and
at maximum flow.
5
Turn temperature control to mid-
temperature. Water remains cold, but
flow is reduced.
7
Turn power control to high. Water
temperature rises further.
9
Stop shower and switch electrical
supply off.
4
AIR IN SYSTEM ?
Turn shower off.
Remove filter from shower unit.
Push rod up until water flows freely.
Refit filter, turn until locked.
6
Turn power control to eco. Water
temperature rises, but stays cool.
8
Turn temperature control to test water
temperature
adjusts automatically as you adjust the
temperature.
10
Residual water may drain for a few
minutes.
19
change. Water
1265606-W2-A
flow