Important Safety Information - Mira Elite QT Installation & User Manual

Important Safety Information

WARNING! This shower can deliver scalding temperatures. For
continued safe operation, follow all instructions, warnings and
cautions contained in this guide and on or inside the shower unit.
Failure to follow the instructions provided with the shower will
invalidate the guarantee.
PLEASE OBSERVE THE FOLLOWING TO REDUCE THE RISK OF
FIRE, ELECTRIC SHOCK OR INJURY:
INSTALLING THE SHOWER
Installation of the shower must be carried out in accordance with
1.
these instructions by qualified, competent personnel. Read all
instructions before installing the shower.
Isolate the electrical and water supplies before commencing
2.
installation. The electricity must be isolated at the consumer unit
and the appropriate circuit fuse removed, if applicable. Mains
connections are exposed when the shower cover is removed.
DO NOT install the shower in areas with high humidity and
3.
temperature (i.e. steam rooms and saunas).
DO NOT install the shower where it may be exposed to freezing
4.
conditions. Ensure that any pipework that could become frozen
is properly insulated.
DO NOT connect the outlet of the shower to any tap, control valve,
5.
trigger handset or showerhead other than those specified for use
with this shower. Only Kohler Mira recommended accessories
must be used.
DO NOT perform any unspecified modifications, drill or cut holes
6.
in the shower or fittings other than instructed by this guide. When
servicing only use genuine Kohler Mira replacement parts.
If the shower is dismantled during installation or servicing then,
7.
upon completion, an inspection must be made to ensure all
electrical connections are tight and that there are no leaks.
USING THE SHOWER
The shower must be operated and maintained in accordance with
8.
1265606-W2-A 2