Table of Contents
Advertisement
Click Apply to apply the settings.
Access Control List
This is a way to control which devices on the network have SNMP access to the Policy
Manager.
To get to the following page, browse to: Maintenance >> Management >> SNMP and click
on the Access Control List tab:
The following fields are available:
Field
IP Address
Mask
Click Add to add an Access Control List.
Click Edit to edit existing Access Control List settings.
Click Delete to delete an Access Control List.
Click Save to save the changes made.
Click Cancel to revert the settings to their previous state.
Add Access Control List
V3
Table 10-11 – Add SNMP Host
Figure 10-12 – Access Control List
Description
The IP address of the network host.
The netmask of the network host.
Table 10-12 – Access Control List
68
D-Link DUA-2000 Policy Manager User Manual
Advertisement
Table of Contents
