Ddp - D-Link DUA-2000 User Manual

DDP

D-Link Discovery Protocol (DDP) is a protocol for automatic discovery of IP devices. It can
be used to identify network devices to each other and manage the network using software
such as D-Link Network Assistant (DNA).
To get to the following page, browse to: Maintenance >> Management >> DDP:
The following fields are available in the DDP Global Setting section:
Field
D-Link Report
Timer
The following fields are available in the DDP Per Port Setting section:
Field
Port 1 State
Port 2 State
Port 3 State
Port 4 State
Figure 10-18 – D-Link Discovery Protocol
Description
The amount of time to wait between scans of the directly connected
local devices.
Table 10-19 – DDP Global Setting
Description
Enable of disable DNA on port 1. This can be set to:
Enabled
Disabled
Enable of disable DNA on port 2. This can be set to:
Enabled
Disabled
Enable of disable DNA on port 3. This can be set to:
Enabled
Disabled
Enable of disable DNA on port 4. This can be set to:
Enabled
74
D-Link DUA-2000 Policy Manager User Manual