Snmp Traps - D-Link DUA-2000 User Manual

Password
Privacy Algorithm
Click Apply to apply the settings.

SNMP Traps

This is used to enable and disable SNMP traps on the Policy Manager.
To get to the following page, browse to: Maintenance >> Management >> SNMP and click
on the SNMP Traps tab:
The following fields are available:
Field
SNMP Traps
SNMP
Authentication
Trap
Linkchange Traps
MD5
SHA
The password of the user, if No-Auth or Auth No-Priv have been
selected in the Security Level.
The encryption algorithm used to ensure privacy of the SNMP data. It
can be set to:
DES
AES
Table 10-8 – Edit SNMP V3 User
Figure 10-9 – SNMP Traps
Description
This is used to enable or disable SNMP traps and can be set to:
Enabled
Disabled
This is used to enable or disable SNMP Authentication Traps and can
be set to:
Enabled
Disabled
This is used to enable or disable SNMP Linkchange Traps. These are
65
D-Link DUA-2000 Policy Manager User Manual