Firmware Upgrade - D-Link DUA-2000 User Manual

Boot From Image
Click Save to save the changes made.
Click Cancel to revert the settings to their previous state.

Firmware Upgrade

This page can be used to upgrade the Policy Manager's firmware, using TFTP, HTTP and
USB devices.
To get to the following page, browse to: Maintenance >> System >> Firmware Upgrade
and click on the Firmware Upgrade tab:
The following fields are available in the Firmware Upgrade From TFTP section:
Field
TFTP Path
default image to boot from, the word (Boot) will be displayed next to
the image name.
The image properties are as follows:
Firmware: The firmware version.
Date: The date that the image was uploaded to the Policy Manager, in
HH:MM:SS MM/DD/YYYY format.
Select the image to boot from. This can be set to:
Image1
Image2
Table 10-21 – Current Firmware Information
Figure 10-20 – Firmware Upgrade
Description
The path to the firmware image file. This is transferred via TFTP and
is in the format:
tftp://<host><path to image>
<host> can be an IP address or DNS name
76
D-Link DUA-2000 Policy Manager User Manual