Access Point Mode Settings - D-Link AC1200 Mesh User Manual

Section 3 - Configuration

Access Point Mode Settings

This page lets you configure the settings to use the DAP-1610 as an access point. Connect an Ethernet cable from a LAN port in your
router to the LAN port at the bottom of the DAP-1610.
To access this page, click the Settings drop-down menu at the top of the page, and select Extender. Under Existing Network,
choose Ethernet to utilize the DAP-1610 as an access point. Click Save to apply the settings and return to the home page.
Refer to "Extender Settings" on page 28 for more information regarding configuration options.
D-Link DAP-1610 User Manual 23