Snmp Host List - D-Link DUA-2000 User Manual

Coldstart Traps
Warmstart Traps
Click Save to save the changes made.
Click Cancel to revert the settings to their previous state.

SNMP Host List

This is used to define Network Management Systems (NMSs) that will receive SNMP traps
from the Policy Manager.
To get to the following page, browse to: Maintenance >> Management >> SNMP and click
on the SNMP Host List tab:
The following fields are available:
Field
IP Address
used if a link changes state and can be set to:
Enabled
Disabled
This is used to enable or disable SNMP Coldstart traps. These are
used if the system was powered-off before being powered-on and can
be set to:
Enabled
Disabled
This is used to enable or disable SNMP Warmstart traps. These are
used if the system was rebooted and can be set to:
Enabled
Disabled
Table 10-9 – SNMP Traps
Figure 10-10 – SNMP Host List
Description
The IP address of the SNMP host receiving the traps from the Policy
Manager.
66
D-Link DUA-2000 Policy Manager User Manual