Other Settings; Termination Processing During Generation Of A Fire Alarm Or During Occurrence Of A Serious Error In A Projector - Sony LKRA-009 Installation Manual

5-14. Other Settings

5-14-1. Termination Processing During Generation of a Fire Alarm or During
Occurrence of a Serious Error in a Projector
When a fire alarm is generated or a serious error occurs in a projector, this system can detect the alarm or
error and execute the set processing. The contents of processing can be set separately.
t
To detect a fire alarm, it is necessary to connect the server and a fire alarm system and perform proper
setting. For more details, refer to "Associating a GPIO channel (only an input pin) with an Emergency
signal (Fire Alarm)" in Section 5-13-4.
1. Tap "Configuration" tab.
2. Tap [Status] → [Emergencies].
An Emergencies screen is displayed.
[Status] [Emergencies] Configuration tab
Screen example
Emergency Response pane
3. In the Emergency Signal pane, select the trigger during processing execution.
Select "Fire Alarm" for processing during generation of a fire alarm. Select "Projector Stop" for
processing during occurrence of an error in a projector.
4. Select the processing performed when the trigger is received. (Multiple items can be selected.)
. Stop Current Show: Stops the current show.
. Disable Playback:
. Douse Lamp:
. Lamp OFF:
. Audio Muting:
. System Shutdown: Shuts down the system.
t
Only Stop Current Show and Lamp OFF can be selected when Projector Stop is selected in the Emer-
gency Signal pane.
Digital Cinema Dual System
Emergency Signal pane
Stops the current show and disables the playback until emergency is canceled.
Closes the douser of a projector.
Turns off the lamp.
Reduces the sound.
[Apply]
5-55 (E)