Network Setting - Sony LKRA-009 Installation Manual

5-11. Network Setting

The network of this system is set and the IP address of external equipment is registered, as described
below. Multiple system connection destinations (IP addresses) can be registered when operating this
system using a computer. The connection destination can be easily switched by tapping the number in the
left corner of a Status-Auditorium screen.
1. Tap the "Configuration" tab.
2. Tap [System] → [Network].
The Network screen is displayed.
[System]
Screen example
[Network] Other Auditorium pane
Network setting of the system
. SMS Server Settings/IP Address:
. SMS Server Settings/DNS Address: Register a DNS server.
. Extended Settings/Data Port:
Tap [Apply] after you have entered each IP address. The system is automatically restarted.
n
. 192.168.6.x cannot be set to the IP address.
. Set so that CTRL and DATA ports do not belong to the same sub-net.
. Enter 0.0.0.0 to the IP address of an unused port.
IP address registration of external equipment
. Extended Settings/eCNA:
. Extended Settings/Audio Processor: Enter the IP address of the audio processor when connecting with
Tap [Apply] after you have entered each IP address.
Digital Cinema Dual System
SMS Server Settings pane
Enter the IP address of the CTRL port on the rear panel of a server.
Enter the IP address of the DATA port on the rear panel of a server.
Enter the IP address of the theater automation equipment when
connecting with theater automation equipment that conforms to an
eCNA protocol.
an audio processor through LAN.
[Apply]
Extended
Settings pane
5-41 (E)