Checking The Software Version; Checking The Projector - Sony LKRA-009 Installation Manual

5-1-2. Checking the Software Version

After logging in, the operation screen is displayed. Check if the software integrated version displayed in
the lower right of the screen is the version that needs to be updated. For the version to be updated, contact
your local Sony Sales Office/Service Center.
Screen example

5-1-3. Checking the Projector

Before starting an update, be sure to check the projector status in each item on the top of the screen.
1
1 Confirm that playback has been stopped.
2 Confirm that the projector is in standby mode.
3 Confirm that ingest operations have been stopped.
n
. Before updating, set the projector to the standby mode. The update of projector cannot be performed in
the state other than the standby mode (lamp ON or OFF mode).
. Do not play back or ingest content, or perform any other operations during an update.
. When updating via a computer, do not refresh the web browser during the update.
. When performing updates, use a touch panel or personal computer for each projector and server pair,
and make sure multiple users do not attempt access at the same time.
Digital Cinema Dual System
2 3
Integrated versions
5-3 (E)