Check Of Video Signal And Audio Output - Sony LKRA-009 Installation Manual

5-10. Check of Video Signal and Audio Output

Display the test contents and check the video signal and audio output.
1. Tap the "Status" tab.
2. Tap [Auditorium] → [Load] A.
The Load Content screen is displayed.
[Auditorium]
Screen example
3. Select the data to be reproduced, and then tap [Load] B.
4. Tap the reproduction button to reproduce the data.
t
To display the test contents, perform the setting in the following procedure.
1. Install the color meter.
2. Tap the "Configuration" tab.
Tap [Projector|$2D%] → [Set|Function].
The Set Function screen is displayed.
[Projector|$2D%]
Screen example
Input Channel pane
[Set|Function]
3. Set the input channel in the Input Channel pane. (Refer to Section 5-14-11.)
5-40 (E)
[Load] A
[Load] B [Cancel]
Load Content screen
Digital Cinema Dual System