Registration Of Ups; Registration Of Audio Processor - Sony LKRA-009 Installation Manual

5-13-2. Registration of UPS

When this server and uninterruptible power systems (UPS) are connected using a USB cable, the system
can be safely shut down by detecting the resulting error in case that the power supply from UPS stops. To
use this function, it is necessary to register the type of UPS to be connected. The ini file (text file in
which initialization is described and whose file name is SMSMgrServer_Custom.ini) saved in this server
must be changed to register the type of UPS. Refer to section 5-13-1 for the change in an ini file.
1. Enter the "ini" file edit mode. (Refer to steps 1 to 5 in Section 5-13-1.)
2. Add the line below.
When UPS is not connected using the USB cable, do not add the line.
com.sony.dcinema.upsMgr.impl.UPSManager.upsClassPath=com.sony.dcinema.upsMgr.impl.Apcupsd
Add the bold-faced portion as described below according to the type of UPS to be used.
. When using UPS made by APC:
. When using UPS made by TrippLite: com.sony.dcinema.upsMgr.impl.TrippLited
3. Save the changed contents and end the registration. (Refer to steps 6 to 8 in Section 5-13-1.)

5-13-3. Registration of Audio Processor

When this server and an audio processor are connected using RS-232C or a LAN cable, the volume can
be controlled and muted from this unit to the audio processor. To use this function, it is necessary to set
the type of the audio processor to be connected and the connection method. The ini file (text file in which
initialization is described and whose file name is SMSMgrServer_Custom.ini) saved in this server must
be changed to set the type of an audio processor and the connection method. Refer to Section 5-13-1 for
the change in an ini file.
1. Enter the "ini" file edit mode. (Refer to steps 1 to 5 in Section 5-13-1.)
2. Add the line below.
When audio processor is not connected, do not add the line.
com.sony.dcinema.serial.impl.AudioDeviceManagerImpl.audioProcessorClassPath=com.sony.dcin-
ema.serial.impl.DCP300Control
Add the bold-faced portion as described below according to the type of the audio processor to be
connected.
. When using DCP300:
. When using CP650:
. When using CP750:
. When using CP850:
. When using CSP850A:
. When using FCQA8631: FCQA8631Control
. When using DCP1000:
* When enabling the ATMOS reproduction by using CP850, the registration of license is required.
(Refer to Section 5-13-5.)
Digital Cinema Dual System
com.sony.dcinema.upsMgr.impl.Apcupsd
DCP300Control
CP650Control
CP750Control
CP850Control (*)
CSP850AControl
DCP1000Control
5-47 (E)