Mono\Stereo Switch - Roberts R9914 Owner's Manual

Mono/Stereo switch
1. To listen to FM stereo broadcasts, tune to the required
station, plug in headphones and set the "Mono/Stereo
switch located on the left side of the radio to the FMST
position. If the station being received is weak some
hiss may be audible, to reduce the hiss set the Mono/
Stereo switch to the FM position to return to mono
operation.
Note: FM stereo is only available via headphones.
Headphones
Headphones or earphones for use with your radio should
be stereo and fitted with a 3.5mm stereo jack plug. Insert
the headphone plug into the
of the radio. When the headphones are plugged in the
loudspeaker is automatically disconnected.
48
socket on the left side