Note: If all the preset memory locations are full, pushing
the M button will cause the display to show FULL. If you
still want to store a new station press any numbered
button for more than 2 seconds, the new station will be
stored in the selected memory location, the original station
in this location will be cancelled.
Overwriting a station in preset memory
1. Tune to the desired frequency using one of the
previously described tuning methods. Press the M
button and then hold down the required memory preset
button for more than 2 seconds.
e.g. to overwrite memory preset 7, tune to the required
station, press M then press and hold down numbered
button 7 for more than 2 seconds.
30
1
2
3
4
5
6
7
8
2
M
M
9
7