Setting The Hws Alarm - Roberts R9914 Owner's Manual

Setting the HWS (Humane Wake System) alarm
A repeating beep tone will sound when using the HWS alarm. The alarm beep will increase in volume every 15
seconds for 1 minute followed by 1 minutes silence before repeating the cycle. The HWS alarm will sound for 1 hour
unless turned off by pushing the "Power" button.
1. Press the button the display will show the last
alarm time set, (this will be "0:00" the first time the
alarm is set). The alarm symbol
display.
2. Press the numbered buttons to set the alarm on time,
followed by the Enter button to complete the setting
The display will return to showing real time.
3. To verify the alarm time, press the
display the alarm time followed by the Enter button to
return to real time mode.
42
will flash in the
1
4
7
button to
M
A M / P M
2 3
5 6
8 9
0 C
Fr eq
Tim e S et
E n te r
M em o S c a n M em o D e l