Led Settings And Color; Closing The Device Settings Popover - Saleae Logic User Manual

Hide thumbs

Table Of Contents

Table of Contents

5. Analog Channels Enable and disable the digital channels you would like. You can click and drag

over the control to change a number of channels at the same time.

Note: Not all devices have selectable channels. The original Logic does not have selectable

channels, and Logic 4 only allows you to enable or disable the analog input. The digital channels are

always enabled. You can switch the analog channel on and off by selecting sample rate options with

and without analog sample rates.

6. Voltage Edit the voltage level of your digital signals. This affects the voltages at which an input is

considered a one or a zero.

Note: Logic Pro 8, Logic Pro 16, and the original Logic16 are the only devices with adjustable

thresholds. See the PDF Users Guide, Specifications, and Data Sheets to find what voltage options

are available for each device.

7. Performance Not all computers or USB host controllers will be able to capture at top speed. If that

happens, you can throttle back the performance setting with this control. It will update the sample

rates that are available.

Note: The performance control is only available when analog and digital channels are enabled at the

same time. When sampling digital only or analog only, slower sample rates will be available from the

sample rate dropdown, which will reduce USB throughput.

Note: Logic 4 is the exception to this. It will not display a performance selector even when recording

analog and digital channels at once. All possible sample rates are always available in the dropdown.

8. Device While no Logic hardware is connected, you can select a device to simulate. There is no

option to simulate our discontinued products. If you have more than one Logic attached, you can

toggle between them here. You also can control the LED color by clicking the gear icon.